InAs/GaSb superlattice focal plane arrays for high-resolution thermal imaging

The first fully operational mid-IR (3–5 μm) 256×256 IR-FPA camera system based on a type-II InAs/GaSb short-period superlattice showing an excellent noise equivalent temperature difference below 10 mK and a very uniform performance has been realized. We report on the development and fabrication of the detecor chip, i.e., epitaxy, processing technology and electro-optical characterization of fully integrated InAs/GaSb superlattice focal plane arrays. While the superlattice design employed for the first demonstrator camera yielded a quantum efficiency around 30%, a superlattice structure grown with a thicker active layer and an optimized V/III BEP ratio during growth of the InAs layers exhibits a significant increase in quantum efficiency. Quantitative responsivity measurements reveal a quantum efficiency of about 60% for InAs/GaSb superlattice focal plane arrays after implementing this design improvement. The paper presented there appears in Infrared Photoelectronics, edited by Antoni Rogalski, Eustace L. Dereniak, Fiodor F. Sizov, Proc. SPIE Vol. 5957, 595707 (2005).     

Photopolymers for Rapid Prototyping of Soluble Mold Materials and Molding of Cellular Biomaterials

To substitute cross-linked photopolymers in rapid prototyping of mold materials and therefore extend the range of materials which can be casted, organo-soluble photopolymers were developed. Branched bisalkylacrylamides were suitable as base component for such formulations, due to their high reactivity, good mechanical properties, and excellent solubility of the formed polymers. These molding materials were used to prepare cellular biocompatible materials which could be used as bone replacement materials. Biocompatible crosslinkers based on methacrylates from hydrolyzed gelatine or lactic acid ethyleneglycol blockcopolymers and commercially available reactive diluents are the base components of such a formulation. Biocompatibility was investigated by osteoblast-like cells. Cellular biocompatible parts were obtained by thermal polymerization in soluble mould materials prepared by 3D-photoshaping.     

Functional Central Limit Theorems for Triangular Arrays of Function-Indexed Processes under Uniformly Integrable Entropy Conditions

Functional central limit theorems for triangular arrays of rowwise independent stochastic processes are established by a method replacing tail probabilities by expectations throughout. The main tool is a maximal inequality based on a preliminary version proved by P. Gaenssler and Th. Schlumprecht. Its essential refinement used here is achieved by an additional inequality due to M. Ledoux and M. Talagrand. The entropy condition emerging in our theorems was introduced by K. S. Alexander, whose functional central limit theorem for so-calledmeasure-like processeswill be also regained. Applications concern, in particular, so-calledrandom measure processeswhich include function-indexed empirical processes and partial-sum processes (with random or fixed locations). In this context, we obtain generalizations of results due to K. S. Alexander, M. A. Arcones, P. Gaenssler, and K. Ziegler. Further examples include nonparametric regression and intensity estimation for spatial Poisson processes.     

Interpolatory properties of best rationalL 1-approximations

In this paper the distribution of the zeros of the error function for bestL ₁-approximation by rational functions fromR _n,m is considered. It is shown that the maximal distance between such zeros isO(1/(n–m)), ifn > m.Communicated by Edward B. Saff.     

SupersymmetricZ 0 decay into lepton-antilepton and two photinos

Working in a softly broken supersymmetricSU(2)×U(1) standard model with the photino as lightest SUSY-particle \((m_{\bar \gamma } \leqq 10GeV)\) differential and total rates for the decay \(Z^0 \to l^ + l^ - \tilde \gamma \tilde \gamma \) as functions of various parameters of the model are presented. The decay involves intermediate scalar leptons and the total rate strongly depends on their masses. The results indicate that for a scalar lepton mass less than 70GeV this process might still be seen at SLC and CERN LEP I.     

Observation and analysis ofE mesons in\bar p p annihilation at rest in H2 gas

Antiproton-proton annihilation at rest in a gaseous H₂ target at NTP into the final state π⁺ π^? K ^± π^? (K ⁰) with an undetectedK ⁰ or \(\bar K^0 \) has been investigated. We observe theE(1420) resonance in the invariant mass spectrum (K ⁰)_miss K ^± π^? with massM _E =1413±8 MeV/c² and widthГ ^E =62 ± 16MeV/c² and find evidence for the production of thef ₁(1285). The absolute branching ratio of \(\bar p\) p → π⁺ π^? E ⁰,E ⁰ →K ₀ ^L K ^± π ^? at (61±6)%P wave annihilation is (3.0±0.9)·10^?4 of all annihilations. The observed suppression of theE production fromP wave with respect to theS wave together with some simple selection rules suggest that the quantum numbers of theE(1420) areJ ^pc=0^?+ and not I⁺⁺.     

Die Bestimmung von Glyoxal und Glyoxyls?ure

Zusammenfassung Es werden Methoden beschrieben, mit deren Hilfe Glyoxal und Glyoxylsäure nebeneinander bestimmt werden können. Die Summe der Carbonylverbindungen wird mit einer bekannten Menge Semicarbazid zu den Semicarbazonen umgesetzt und das überschüssige Semicarbazid jodometrisch bestimmt. Glyoxal allein wird in einer zweiten Bestimmung mit Lauge nach Cannizzaro in glykolsaures Natrium umgesetzt und der dafür erforderliche Laugeverbrauch titrimetrisch bestimmt. Aus der Summe Glyoxal + Glyoxylsäure einerseits und der Glyoxalbestimmung andererseits läßt sich der Glyoxylsäuregehalt berechnen.     

Synthesen von Heterocyclen, 122. Mitt.: Über die Reaktion des Perimidons mit aktiven Malonestern

Zusammenfassung Perimidon (1) reagiert mit monosubstit. Malonsäure-trichlorphenylestern (2) bei 250° zu 9-Hydroxy-5,7-dioxo-4,5-dihydro-7H-pyrido[1,2,3-cd]perimidinen (3), die durch saure Hydrolyse zu 10-Amino-4-hydroxy-benzo[h]carbostyrilen (4) gespalten werden.

---

Syntheses of heterocycles, CXXII: Reaction of perimidone with reactive malonates

Perimidone (1) reacts with monosubstituted 2.4.6-trichlorophenyl malonates at 250° to 9-hydroxy-5.7-dioxo-4.5-dihydro-7H-pyrido[1.2.3-cd]perimidines (3), which are cleaved by acid yielding 10-amino-4-hydroxy-benzo[h]quinolin-2-ones (4).

     

Stereoselective synthesis of cis-p-menth-8-ene-1,7-diol, cis-p-menthane-1,7-diol, and cis-p-menthane-1,7,8-triol

The natural products cis-p-menthane-1,7-diol (cis-IV), cis-p-menth-8-ene-1,7-diol (cis-I) and cis-p-menthane-1,7,8-triol (cis-II) are obtained starting from the corresponding cis-cyanohydrins, cis-2 and cis-7, respectively, by chemical transformation of the cyano into the hydroxymethyl group. The key step of the synthesis is the very high cis-selectivity (> or = 96 %) of the MeHNL-catalyzed HCN addition to 4-alkylcyclohexanones. From 4-isopropylcyclohexanone (1) the cyanohydrin cis-2 and from 4-(1-methylvinyl)cyclohexanone (6) the cyanohydrin cis-7 result almost quantitatively. Regioselective hydroxylation of cis-I affords the triol cis-II. X-ray crystal structure determinations of the final products confirm their cis-configuration.     

Accreditation of reference material producers: the example of IRMM's Reference Materials Unit

The potential approaches for third-party assessment of reference material producers are revisited and the activities of the Reference Materials (RM) Unit of the Institute for Reference Materials and Measurements (IRMM) to obtain accreditation to ISO Guide 34 and ISO 17025 are described. Accreditation was related to the Unit as all matrix RM activities of the institute are concentrated there. A management system was established that allows sufficient flexibility to be applicable to a wide range of RMs while being precise enough to ensure compliance with ISO Guides 30, 31 and especially 34 and 35. Accreditation was achieved in 2004 with independent scopes for testing and RM production and was confirmed and extended in 2005. The key aspects of the RM Unit's management system for RM production are presented. Presented at BERM-10, April 2006, Charleston, SC, USA